Approx. 200 x Hardened Brass Pins (25mm)

Click picture for a large version

Approx. 200 x Hardened brass pins (25mm, 1mm shaft with 3mm flat top). For refurbishing pin Bagatelle games. Quantity may vary by up to 5 pins

Ref: 00WHR7

£6.99

£5.83 (Ex.VAT)

ETA: 1 working day + transit time

---

 

For an immediate quote & ETA, add to the basket & select your location.

• Pack of 200 x hardened brass pins
• Replacement pins for old pin Bagatelle games
• Specifically selected for Masters Classic Pin Bagatelle Game but could work on others
• Beautiful shiny brass pins which 'ding' nicely when struck with a metal ball
• Can be used as a prime pin due to extra springiness of these pins

Often the pins or nails on an old pin bagatelle game have gone rusty or are some are missing, which ruins the game. If you have an old pin bagatelle game that needs refurbishing, this set of pins may be the solution.

With this set of 200 hardened brass pins you can replace all the pins on your old bagatelle game to refresh it and make the whole game look great and play well. Or perhaps you just want to just replace a few of the pins so that you can play the game properly again. Either way these brass pins should do the trick. We've selected them specially for bagatelles due to their qualities which include:

• Clean shiny brass nails that look great
• Make a nice audible ping when struck by a metal ball
• Specially hardened for extra springiness

Most bagatelle games have a special 'prime pin' - the first pin in the top left that each ball hits before rebounding back up the game and into the field of play. On many bagatelle games, this pin is different to the others, being especially springy or bouncy. The brass pins that we sell are sufficiently bouncy to act as the prime pin on some bagatelles although this is not guaranteed to work on every bagatelle because it depends on the specific design. Our own Masters bagatelle game uses these pins for the prime pin and also all the other pins across the playing field.

Please do not buy before first checking that the dimensions of these pins will work for you. Their length is 25mm. The stems are approx. 1mm diameter with the tops around 3mm across.