Toad in the Hole table
Toad in the Hole Table with 4 Brass Toads - lead lined playing surface (unfinished wood)
Ref: 00K105
£589.90
£491.58 (Ex.VAT)
ETA: 21 working days + transit time
Price includes delivery for Eng/Wales/Lowlands.
A genuine Toad in the Hole table with a lead lined top supplied with 4 brass toads. This wonderful version has an elegant chute for coin return rather than the more common, but more cumbersome, drawer.
- Genuine Toad in the Hole table
- Lead lined surface
- 4 brass Toads (coins) included
- Pub game hundreds of years old and still extremely popular in Sussex
- Brilliantly simple yet skillful game
- Made in Britain
Made to the same dimensions as tables used in the annual World Championships, this table is constructed from Pine wood and features a lead lined surface.
Toad in the Hole is a popular Pub game, mainly played in Sussex centered around the town of Lewes, where the World Championships are held. It's a simple game that everyone can enjoy but still requires a good level of skill. The objective is to land your toads (brass coins) flat on the surface of the table or in the hole.
This table is made to order by a British craftsman. The worst case lead time is 4 weeks - but it's usually less than this; if you have a deadline, please contact us and we will find out if it's possible.
The basic table is made from unfinished soft wood (pine). This allows you to stain or paint or polish the table to your own desire. However, we do offer a polish finish at extra cost. Click on the picture to see the end result. Colour may vary slightly from the picture.
Also available is a rubber mat ochee to go with the table. The mat serves a double purpose - protecting the floor from toads that come off the table and providing the throwing line. The rear of the mat should be put level with the rear of the table.
The table is sent with the rear board upside down and the catching tray reversed. Before playing, both components need to be unscrewed and re-attached with the correct orientation. This requires a screwdriver but is a simple operation.
Table dimensions:
height to top of backboard = 96 cmheight to playing surface back = 72 cmheight to front of table = 67 cmfull width table = 45 cmdepth of table = 45 cm (plus collecting tray)
Playing surface:depth front to back = 41 cmwidth = 32.5 cm
(As all tables are made by hand there may be minor variances in measurements.)
Lead is a soft metal and as with all genuiine toad tables, the lead will gradually deform and be warped by the Toad coins over time (this is all part of the fun - every toad table ends up with its own character). It will be necessary eventually to reform the lead either with a hammer or by hand. And after many years of use the lead may need replacing.
Please note that lead is a toxic metal if imbibed. We advise washing your hands after each use. This table is not suitable for children.
Hard wax oil finish for Toad in the Hole table (clear finish)
Price includes delivery for Eng/Wales/Lowlands.
(can only be ordered to accompany other products on this page)
Ref: 00K1HW
£74.99
£62.49 (Ex.VAT)
Hard wax oil finish for Toad in the Hole table (medium oak finish)
Price includes delivery for Eng/Wales/Lowlands.
(can only be ordered to accompany other products on this page)
Ref: 00K140
£74.99
£62.49 (Ex.VAT)
Set of 4 Brass Toads for Toad in the Hole
ETA: 1 working day + transit time
Ref: 00KR67
Was: £31.99
£29.49
£24.58 (Ex.VAT)
Winmau Xtreme Dart Mat (Heavy-Duty)
Price includes delivery for Eng/Wales/Lowlands.
ETA: 1 working day + transit time
Ref: 00K6H1
Was: £57.99
£54.99
£45.83 (Ex.VAT)
Approximate Dimensions
Toad in the Hole Table with 4 Brass Toads - lead lined playing surface (unfinished wood)
100 x 45 x 46cm; playing surface 41cm front to back and 33cm wide
39.4x17.7x18.1 inch; playing surface 16.1 inch front to back and 13 inch wide
Winmau Xtreme Dart Mat (Heavy-Duty)
300 x 64cm
9.8x2.1 feet
You can find out more about the history of Toad in the Hole from The Online Guide To Traditional Games.